Advantages:

• Easy to install and clean
• Non-cracking or powdering
• Water cleanable when fresh
• Chemical and temp. resistant
• Stain resistant
• Colour-fast

Applications:

Kitchens, bathrooms, swimming pools, fountains, hospitals, operation theatres, sterilization rooms, restaurants, cafeterias, light industrial applications and high traffic areas.

Coverage:

Varies with tile size and grout width

Colour:

Available in a range of more than 20 colours.

Packing :

1 Kg., 5 Kg., 10 Kg

Instruction for Use Epoxy Grout:

• Before Epoxy Grouting, Remove Excess Adhesive & Dust from tile joints.
• Clean the tile Surface with a Sponge or cotton cloth to remove dift, dust
  Adhesive & Stain.
• Pour the contents of (Part-A) Resin (Part-B) Hardner  & (Part-C) filler in to a clean pail.
• Mix (Part-A) , (Part-B) & (Part-C) throughly for 1 minute using a margin trawel and Mix. Add remainder slowly.
• If required to achieve desired consistency.
• Fill the tile joint with the Epoxy Grout.
• Check the joints to Harden (30-50 minutes) & begin initial clean up.
  Power plenty of clean water on the joints & rub with a scrub pad in circular motion.
• Draw a clean, wet cotton cloth across the tile surface to remove residue.
• Repeat as necessary by rinsing the cotton
  frequency in a pail of clean water until the oily felling has gone.
• Change water frequently.
• Finaly clean the tiles surface with water & Soap solution after 12-24 Hours or grouting to remove Epoxy haze.
  

Note:

Epoxy Grout rub on the tiles and ceromic products by magic moments tile cleaner or soap solution with scotch brite & cotton cloth.